Christmas Shaker Card 

In a previous most, I said I would do a more detailed write up of a card using the gorgeous Best Friends collection from December 2016’s Making Cards Magazine, and here it is.

I love the images and didn’t feel that they needed much extra, so I decided to make a shaker card, meaning that all the attention will beon the lovely topper.

You will need:

  • 5×7″ white card blank
  • Making Cards Magazine Dec 2016
  • Silver/holographic sequins
  • Acetate (and an anti static bag or similar)
  • 3d foam tape
  • Glitter glue
  • Craft box basics

How to:

  1. Select and cut a topper from the Best Friends collection. I liked the little present, and I also wanted one with a larger more empty space to one side so I could use some trees from the collection.
  2. Cut a piece of a relatively plain background paper to 124x176mm and layer on a backing card of your choice (mine was just for strength so I haven’t listed it, but you can make a frame of it if you want).
  3. As I wanted to use my background paper as a frame, I cut an aperture to 2mm smaller than my topper, ensuring it was central.
  4. Attach the topper iin the centre of the card blank.
  5. Cut a piece of acetate around 100mm bigger than your aperture so you’ve got a good amount of border to stick. Fasten this to the rear of your aperture. I used red double sided tape because it’s very sticky and strong and I know I’ll not have any gaps.
  6. Surround your topper with 3d foam tape (or lots of little pads if that’s all you’ve got), making sure there’s no gaps big enough to lose your sequins through or for them to get stuck in.
  7. Put a selection of sequins over the topper. I find too many is daunting, less is more here.
  8. Wipe the inside of your acetate with the antistatic bag to stop sequins sticking to it, then fix your frame over your topper and give it a shake to enjoy yourhard work!
  9. Cut two trees from the Best Friends collection and stick these to aperture. the bottom left corner of the aperture.
  10. Finally, add any embellishments you want to the card. I had slightly scruffy corners to my aperture so chose to disguise tgese behind sequins matching the shakers, and I added some turquoise glitter randomly over the frame for some good old festive bling. If you want, now’s the time to add your greeting.
Advertisements

4 thoughts on “Christmas Shaker Card 

  1. Kim M

    Making Cards is one of my most favourite magazine, and l am always full of good intentions when I receive it and don’t find the time to use the lovely papers, so well done you! Lovely cards, that make it feel like Christmas x

    Liked by 1 person

    Reply
    1. Isn't She Crafty Post author

      I’ve got a few booklets of their papers still sitting staring at me, making me feel a bit guilty for not using them, but I try to make at least one per issue and usually find once I do the mojo flows and I make several x

      Liked by 1 person

      Reply

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s