Category Archives: cards

New home cards

My mum asked for two new home cards. One is for old friends of hers, one for new neighbours of known ages. Hopefully you’ll be able to guess which is which.

For this first card, I chose papers from my current favourite pad, a tropical collection which I got from The Works for a whole £1. I wanted classic colours, but with a hint of a modern pattern. I had an antique bronze coloured key charm in my stash, and thought it would be perfect for a new home idea. 

Personally, I tend to prefer making square cards, so this is square, but it would look lovely on a rectangular base too.

I cut my less bold paper to 7mm smaller than my card blank, and layered it onto kraft card (it went who the colours) 3mm bigger, thus leaving a 1.5mm border all around.

The second paper was cut to a square measuring 90x90mm, and layered onto a square of kraft card, allowing a 1.5mm border all around. 

I tied a piece of hemp thread through the key, and used double sided tape to afix it to the back of the smaller square. Then, I attached the small square centrally on the card from, and attached the whole front to the card blank.

 The bow was on and off about 10 times before I decided I liked it, still not 100% convinced, though. 

Finally, I stamped the sentiment directly onto the card. I used a Hunkydory For the Love if Stamps sentiment set, and a black ink.

This second card grew from me finding the image of the gentleman having his diy disaster on the Hunkydory USB 2 which I bought on a whim. He is from the Oldies collection. I thought it would be fun to create a card with another disaster on.

 I was so proud when I remembered how His Lordship had taught me to print, set out off when I went to bed as it takes ages. I broke the printer! HL has managed to do a (very) temporary fix and despite the ink running out as well, it printed! Unfortunately, we’re now in the market for a new printer.

I chose papers which reminded me of 1970s wallpapers and what we’d probably see now as bad taste, likely in a house which needs a bit of TLC and diy. The papers are from my Tonic Studios Simply Patterns pad. I chose a blue base because the topper had printed mainly blue and pink, so I edged it with a blue ink and carried on the theme.

To give the idea of plaster, I used kraft card for my matting and layering. I cut the patterned papers so they each covered half of the card. I stuck the bottom paper down first.

In line with the diy disaster theme, I wanted the card to look like a strip of wallpaper had come off. I carefully ripped a strip 20mm in from the left of the second paper. I stuck the larger piece in line with the bottom patterned paper, then rolled the top of the strip down and glued the strip back in place, the roll showing the ‘plaster’ beneath.

To cover the join in the papers, I used a piece of twine to suggest a dado rail, attaching it behind the card front.

My topper was also matted and layered on kraft card. I wanted to keep the diy theme when I attached it, so I used a brad in each corner to hold it in place. I used a sharpie to draw lines to resemble screws.

Finally, I stamped a ‘new home’ sentiment onto the ‘plaster’, and attached the card front to the card base. 

Deco birthday card

Last week I was practising drawing with my Scan’n’Cut. One of the resulting images was an Art Deco lady from the Tattered Lace Glitz and Glam USB:

I spent a while staring at her trying to decide how to colour her, then inspiration struck. Texture and colour in one, use feathers!

I have a lot of coloured feathers which were cheap in The Works, I like using them to embellish Deco style cards, but I’d never thought of using them as a more focal element.


I used Tacky Glue to draw over the dress on the image, then lay feathers over. It looked bland when I’d done, so I added a shiny bow across the waistline and I was really pleased with the result.
I wanted to keep my card elegant and Deco in style. I really liked the focal sentiments I tried last week, but I needed something more subtle.

 I got the foiling kit for my Scan’n’Cut, but hadn’t played yet. I used Brother Canvas to download and resize the flower ring, then foiled it. The foiling is really easy and I was thrilled with how it looks, although I did manage to foil my sticky mat and waste a lot of foil. Oops.

I stamped a Happy Birthday sentiment in the middle. This panel was as wide as my 7×5 card blanks, so works as a focal element.I attached the Deco lady to the right hand side of it, covering some of the foiled flowers but leaving the shape of the pattern obvious.

The paper I chose was from my First Edition Noir et Chic pad. Fairly subtle but glittery, and a 1920s style design. I didn’t want a heavy background so I decided to create two further panels, meaning that the white of the card blank was able to show through in more places and stop the card feeling too heavy.

What do you think? I’m pleased with it, especially because it’s combining new techniques

Experiments with my Scan’n’Cut

I’m ashamed to say that my Scan’n’Cut spends a lot of time sitting gathering dust. I love it, but it’s a bit too clever and daunting for me, and the mats lose their sticky very quickly (perils of being owned by a cat, his hair gets everywhere) which has cost me a few projects to my consternation. Most of what I use it for is cutting mats and layers, it’s great being able to cut perfectly with my own increments, not ones dictated by die size.

Every so often I have good intentions about using it more, often when I see it being demo-ed on Create and Craft. Today was one of those days.

First, I drew for the first time. I chose three images from the Glitz and Glam USB which I fancied as stamped images and set it to drawing them on plain white card. I tried the colouring option on the plane, it’s covered a lot of the detail link although paler than the original lines so they’re still visible. At first I was unmoved but looking at these again I am increasingly keen on the effect.

Next, I thought I’d try emulating cards I like which focus on one large sentiment, so I chose two of the preset words – Happy Birthday and Noel. I shrank them slightly from the set size, then cut them from Kanban red mirri board. 

As I was removing the cuts from the sticky mat, I realised that I real like the negatives too, so played with masking tape to keep the bits in place ready to be made into cards. 

The cut outs, I mounted on Kanban foiled sentiment card with complementary themes – more birthday words and presents. I kept the cards themselves very simple to really show off the sentiment and the shininess.

I used scraps from my inherited stash for the background for this

A very simple easel card. I mounted the Kanban sentiment card on a piece of white paper with red polka dots and then layered this onto a piece of gold card. The stopper is a scrap from the Kanban foiled card and three punched balloons.

I was chuffed with these, the big bold sentiment appealed. I had a bit of time left, I had intended to play with the machine more, but I used the negatives instead. Still simple and very shiny cards, pretty though.

Scrappy challenge

When I was making dresses and decorating cards with them, I was using my First Edition Noir et Chic paper pad. I’ve had it for years, love the patterns and glitter, and I adore all but one of the papers. As always happens with well loved pads, it’s becoming very depleted and full of unused scraps.

I set myself the challenge of using my scraps.

How to:

This card is a very simple make.

Cut a gold mat to fit a 7×5 card blank with a small border around, then layer on a piece of cream card with a 1mm border. Don’t attach it to the card blank yet.

Cut scraps to more or less the same height (I used 50mm). Don’t worry if some are a little short, it’ll be hidden. Make sure the edges are straight.

Using your card front in a landscape orientation, glue the scraps along the bottom. Make sure you keep even, straight borders – because it’s such a simple layout, any wobbles are so obvious.

Take a piece of ribbon and attach over the tops of the scraps, again being careful to keep it straight. This hides any imperfections in height. Fasten it behind the card front. Add a bow if you like them.

Attach your card front to the card blank.

Add a sentiment to the opposite side to your bow. This can be stamped or die cut. I didn’t trust myself not to smudge a stamped sentiment at the final hurdle, so I turned to my new favourite’happy birthday’ die from Trimcraft and cut it in gold.

I managed to use a very few, lots more scrap busting needed.

Dressing up cards

When I’m home alone and have a bit of time to myself, ie the housework is done or ignorable, I put Create and Craft on and spread my current project over the living room floor. Tuesday was a day of ignoring the housework (we still have forks, and we’ve both got underwear, I can get away with it). 

I was watching today and was pleasantly surprised too see Kathy from Trimcraft on with Dean, especially when my blog got a bit of a mention! I laughed all the way through the show, and was very proud that I managed to resist temptation. Kathy showed how to make origami dresses and Dean crafted along with her. I’ve made these before, and even blogged about a card with one a year back, but it’s one of the techniques which has fallen from my regular repertoire.

Inspired, I spent a happy hour making dresses. They’re so sweet, like a little wardrobe of paper prettiness, but I wasn’t sure what to do with them. I turned back to my trusty mojo booster: Pinterest.

Here are the cards I’ve been making with my dresses. 

Using Noir et Chic by First Edition, and a Trimcraft die

I love the red bow, the only addition to First Edition’s Noir et Chic papers

Using Craftwork Cards’ Antiqued paper collection

Using Craftwork Cards’ Antiqued paper collection again

One of my go-to paper pads, Antique Pinks from The Works

And two dresses spare, yet to be added to a card

Good luck card

One of my colleagues is leaving. She is Irish, so typical good luck cards with four leaf clovers or shanrocks felt inappropriate, too stereotypical. She has mainly worked nights for the past year, so when I was thinking of card ideas I thought it might be nice to nod to that. She’s also a really girlie girl.

Santoro’s Gorjuss range is a favourite of mine. I love how the girl can be used in so many ways for so many occasions. It appeals to my more Gothic, steampunk tastes, but doesn’t have to be darker like that. I have the Nightlight stamp set which seemed perfect for someone who does nights.

I teamed the stamp set with my Gorjuss Tweed papers, some dark gray card with a silver hint, and a 6×6 card blank. The sentiment was made with my Dymo label printer, and I made simple flowers from die cut circles.

How to:

1) Stamp the Gorjuss girl on white card and colour it as you like. I used my Spectrum Hours. Die cut a notebook edge to the stamped image (I used a Tim Holtz die) and tear the other edges, curling one corner up.

2) Layer a piece of paper from the Tweed papers onto a piece of gray card, leaving a small border. 

3) Tear a piece of a paler paper to the same height as your bottom layer, making this approximately 4cm wide. Attach this to the left hand side of the card front, leaving around 1cm of the darker paper visible to the left.

4) Stick the stamped image at an angle roughly central on the card front. Add a sentiment box cut from the Tweed paper stack, and a sentiment of your choice in this, at an opposite angle.

5) Attach the card front to the card blank.

6) Die cut swirls in complementary colours and stick these across the bottom left hand corner of the card. 

 7) Die cut circles in varying sizes. Cut these into spirals and roll them from outside in to form flowers. Stick these between the swirls, using the swirls as a type of foliage. Add one flower to the sentiment for interest and balance.

8) Finally, add a little silver glitter glue to each flower and create three sparkles in the bottom right hand corner. 

Sugar sweet sugar skulls

I bought a gorgeous set of Trimcraft dies recently. I wanted the unicorn more than anything, and loved the peacock, butterflies and flowers are always useful… spend justified.

There was a Mexican sugar skull die in the collection, very detailed and beautiful, but I didn’t see much use in my crafting. That was till I cut it. I love it! I’ve been adding skulls to so much.

Here is the very first card I made with my new sugar skull die. 


The die is so ornate that I wanted to keep the rest of the card very simple. I love this matt gold, a Kanban stash essential. It was one of the first things I reached for when I was trying the cuts of the dies.

 I teamed the gold skull with pink mirri board from the stash I inherited. I decided to inlay the skull, wanting it at the top rather than central, so I cut a skull from the middle of the top third (and now have a lovely pink skull for another project).


At first I was going to use a plain black card for the background, but it was lacking wow, so I dug through my stash and found this black starry card which was packaging I rescued from the recycling ages back. I glued the pink card down first, then carefully applied glue to the back of the skull and fit it in the negative space. I could have pieced the pink decorative elements back in, but I like the black showing through.

I chose a black ribbon with white edging to decorate the card, tying it across the bottom third of the card. Finally, I used my Dymo label printer to make a sentiment sticker, hola seemed appropriate.